Orders Over $100 get FREE SHIPPING and No Handling Fees

Mobile  |  About Us  |  Contact Us  |  Login  |  Cart


    NOT AFFILIATED WITH FORD MOTOR COMPANY®



We carry fiberglass Mustang Hoods for 1965,1966,1967,1968,1969 & 1970 Mustang Hoods. Our huge selection of Mustang Hoods cover a wide range of styles. We have Mustang cowl hoods, Shelby style Mustang hoods, Thunderbolt Mustang hoods, Eleanor Mustang hoods and more. Please allow 1-2 weeks delivery! REMOVAL OF STOCK HOOD SPRINGS IS REQUIRED FOR ALL FIBERGLASS HOODS WITH THE EXCEPTION OF THE METAL FRAME VERSION.
HOOD PINS ARE RECOMMENDED FOR ALL FIBERGLASS HOODS,

Mustang Hood Accessories

Part #

Description

Price

Qty

Purchase

FG-M-320
Universal Fiberglass Hood Vents - Integrate / Mold into your existing fiberglass hood

$124.99/ea


TB-HS1
1965-68 Mustang Light Tension Hood Springs
(not recommended but can be used use at your own risk)
$39.99/pr

TB-HS2
1967-1968 Mustang Shelby Style Long Nose Light Tension Hood Springs
(not recommended but can be used use at your own risk)
$39.99/pr

JV-HPR1
Universal Prop Rod Recommended for all fiberglass hoods. Comes painted silver. $34.99/ea

C5ZZ-16826-S
Stainless Steel Deluxe 35" Universal Prop Rod (recommended for all fiberglass hoods) $39.99/ea


C8ZZ-16C896-A

1968 Mustang Twist Lock Set $119.99/pr


C8ZZ-16934-A

1968 Mustang Twist Lock Bracket 2 required per car $34.99/ea


S9MS-16C892-A

1969-1970 Mustang Shelby Chrome Hood Twist Lock  2 required per car $54.99/ea


D0ZZ-16C896-A

1970 Mustang Chrome Hood Twist Lock $94.99/ea


D1ZZ-16C896-A

1971-1973 Mustang Chrome Hood Twist Lock - Ram Air $94.99/ea

S1MS-16892-DLX
Deluxe Hood Pin Kit (recommended for all fiberglass hoods) $29.99/ea


TZ-2306

1964-70 Mustang Cowl Hood Billet Grill - Fully Polished
Only very slight trimming depending on the manufacturer, may be required.
$99.99/ea


S1MS-16892-K

Billet/Stainless Hood Pin Kit
A modern touch to this classic look. Machined billet aluminum top plates with stainless steel pins and snap rings.
$79.99/kit


5R3Z-6316892-K

Billet Hood Pin Kit
This stainless steel and billet aluminum kit comes complete with special mounting brackets 05-09. Mounting instructions included for 05-09 but can be adapted to fit early model Mustangs as well. Does not fit GT500.
$99.99/kit


C5ZZ-16892-SSK

Stainless Hood Pin Kit $49.99/kit


50650-5511

Ring Bros Billet Hood Pin Kit

$249.99/kit

1964-1966 Mustang Hoods / Fiberglass

REMOVAL OF STOCK HOOD SPRINGS IS REQUIRED FOR ALL FIBERGLASS HOODS WITH THE EXCEPTION OF THE METAL FRAME VERSIONS. PLEASE DRY FIT THE PRODUCT PRIOR TO PERFORMING PREP AND PAINTING WORK. THESE HOODS REQUIRE HAND FINISHING FOR PAINT PREP AND FITMENT. THESE ARE NOT SIMPLE BOLT ON HOODS. HOOD PINS ARE RECOMMENDED FOR ALL FIBERGLASS HOODS, All of our hoods are metal reinforced for the hinge mounting and 1964-1966 Mustang's latch.

Please Note: Due to the delicate nature of shipping fiberglass it's important to note the following damage policy. In all cases, Mustang Depot pre-inspects all products for damages prior to shipping. If you receive a package that has been damaged, and the damage is minor, please notify the driver prior to him leaving and make sure they notate the damage on the bill. If the damage is major, refuse the hood. They will not even accept a damage claim without the damage notation from the driver. It's best to open the package in front of the driver and proceed accordingly. We insure the products full value and it is the responsibility of the carrier to reimburse losses. Damage claim losses are not Mustang Depot's responsibility. Please keep the product and packaging in the original condition in which you receive it, for investigation by the freight company responsible. The claim cannot be paid if the packaging is not present!
Part # Description

Price

Qty

Purchase


FG-MF65HC

1964-1966 Mustang 3" Cowl Hood  Metal reinforced for the hinge mounting and hood latch.


$529.99/ea



FG-MF65H8
1964-1966 Mustang w/ 68 Shelby Style Hood Scoop  Metal reinforced for the hinge mounting and hood latch.

$699.99/ea



FG-MF65H9
1964-1966 Mustang w/ SS Style Hood Scoop Metal reinforced for the hinge mounting and hood latch.
3.25" clearance at the shock towers and 4.5 as it moves toward the radiator support


$749.99/ea


FG-MF65H7
1964-1966 Mustang w/ 67 Shelby Look Hood Metal reinforced for the hinge mounting and hood latch.

$529.99/ea


MR-MF65H7H
1964-1966 Mustang w/ 67 'HIGH RISE' Shelby Look Hood Metal reinforced for the hinge mounting and hood latch. While this hood maintains a close look to the 67-68 Shelby hoods, the front opening is 1.5 inches instead of 1" and the back of the scoop above the carb has nearly a 3 inch rise.

$699.99/ea


FG-
MF65HE

1964-1966 Mustang E2 / Eleanor Hood Metal reinforced for the hinge mounting and hood latch.

$529.99/ea


FG-MF65H6
1964-1966 Mustang Shelby GT350 Style Hood Metal reinforced for the hinge mounting and hood latch.

$529.99/ea


S1MS-16612-MF
1964-1966 Mustang Shelby Style RTM Hood with Metal Frame - Stock metal frame Manufactured using RTM (resin transfer mold) which provides a much better fit and finish than typical fiberglass parts DC-3641AF. These are more expensive to ship due to the packaging provided by the manufacturer is much larger for extra protection, than the regular fiberglass hoods we sell. Metal reinforced for the hinge mounting and hood latch.

$569.99/ea

1967-1968 Mustang Hoods / Fiberglass

REMOVAL OF STOCK HOOD SPRINGS IS REQUIRED FOR ALL FIBERGLASS HOODS WITH THE EXCEPTION OF THE METAL FRAME VERSIONS. PLEASE DRY FIT THE PRODUCT PRIOR TO PERFORMING PREP AND PAINTING WORK. THESE HOODS REQUIRE HAND FINISHING FOR PAINT PREP AND FITMENT. THESE ARE NOT SIMPLE BOLT ON HOODS. HOOD PINS ARE RECOMMENDED FOR ALL FIBERGLASS HOODS, THESE HOODS ARE REINFORCED FOR HINGE MOUNTING.

Part # Description

Price

Qty

Purchase


FG-MF67HC

1967-1968 Mustang Cowl Hood Fits Stock Nose Metal reinforced for the hinge mounting.


$529.99/ea


FG-MF67H7S

1967-1968 Mustang w/67 Shelby Look Hood Fits Stock Nose Metal reinforced for the hinge mounting.

$529.99/ea


MR-MF67H7SH
1967-1968 Mustang w/ 67 'HIGH RISE' Shelby Look Hood Fits Stock Nose - While this hood maintains a close look to the 67-68 Shelby hoods, the front opening is 1.5 inches instead of 1" and the back of the scoop above the carb has nearly a 3 inch rise. Metal reinforced for the hinge mounting.

$699.99/ea


DC-3641U
1967 Mustang Shelby Style RTM Hood without Louvers w/Metal Frame Fits Stock Nose Manufactured using RTM (resin transfer mold) which provides a much better fit and finish than typical fiberglass parts S7MS-16612-MF. Metal reinforced for the hinge mounting.

$529.99/ea



FG-MF67H9
1967-1968 Mustang w/ SS Style Hood Scoop
3.25" clearance at the shock towers and 4.5 as it moves toward the radiator support.
Metal reinforced for the hinge mounting.

$779.99/ea


FG-MF67H8
1967-1968 Mustang w/ 68 Shelby Look Hood Fits Stock Nose ONLY Does not fit the the 1968 Shelby front ends, does not fit the 1967 Shelby and does not fit the 1967 Eleanor front ends. Metal reinforced for the hinge mounting.

$659.99/ea


DC-3641UC

1967-1968 Mustang GT500 / Eleanor Style Steel Hood -for use with "long" E or Shelby noses only Eleanor Parts

$729.99/ea


DC-3641UA
1967-1968 Mustang ALL STEEL Low Rise E Hood 2.5" Rise -for use with "long" E or Shelby noses only Eleanor Parts


$729.99/ea


DC-3641UB
1967-1968 Mustang ALL ALUMINUM Low Rise E Hood 2.5" Rise -for use with "long" E or Shelby noses only Eleanor Parts


$949.99/ea


FG-MF67EHL
1967-1968 Mustang Low Rise Fiberglass E Hood with LOUVERS 2.5" Rise -for use with "long" E or Shelby noses only Metal reinforced for the hinge mounting Reg $659.99

$549.99/ea


FS-M-7001LRH

1967-1968 Mustang Low Rise Fiberglass E Hood 2.5" Rise -for use with "long" E or Shelby noses only Metal reinforced for the hinge mounting

$659.99/ea


FS-M-7001HRH

1967-1968 Mustang High Rise Fiberglass E Hood 4.5" Rise -for use with "long" E or Shelby noses only Metal reinforced for the hinge mounting

$699.99/ea


FG-MF67HSL
1967 Mustang Shelby Style Hood with Louvers (Requires Long Nose or E Kit nose) Metal reinforced for the hinge mounting

$659.99/ea


FG-MF67HS
1967 Mustang Shelby Style Hood without Louvers (Requires Long Nose or E Kit nose) Metal reinforced for the hinge mounting

$569.99/ea


FG-MF68HS
1968 Mustang Shelby Style Hood with Louvers (Requires 68 Shelby Style Long Nose) This hood is even shorter than a stock hood. These are made to have a header panel located in front of the hood to complete the long nose. Does not fit the stock front end, does not fit the 1967 Shelby and does not fit the 1967 Eleanor front ends. Metal reinforced for the hinge mounting

$609.99/ea

1969-1970 Mustang Hoods / Fiberglass

REMOVAL OF STOCK HOOD SPRINGS IS REQUIRED FOR ALL FIBERGLASS HOODS WITH THE EXCEPTION OF THE METAL FRAME VERSIONS. PLEASE DRY FIT THE PRODUCT PRIOR TO PERFORMING PREP AND PAINTING WORK. THESE HOODS REQUIRE HAND FINISHING FOR PAINT PREP AND FITMENT. THESE ARE NOT SIMPLE BOLT ON HOODS. All of our hoods are metal reinforced for the hinge mounting.

Part # Description

Price

Qty

Purchase

FG-MF69HC2
1969-1970 Mustang Cowl Hood 2.5" Metal reinforced for the hinge mounting

$529.99/ea


MR-MF69HCE
1969-1970 Mustang Fiberglass Hood with Cougar Eliminator Scoop Metal reinforced for the hinge mounting

$699.99/ea


MR-MF69HS
1969-1970 Mustang Fiberglass Hood for Shelby GT350 Fiberglass Front Ends - Requires 1969-1970 Mustang Shelby Style Fenders. Metal reinforced for the hinge mounting.

$699.99/ea

Fiberglass body parts do not fit the same as stamped steel parts. While they can be finished to show quality, fiberglass body parts are built closer to race car standards than show car standards. Although fiberglass parts are easy to work with, they can require substantial work to conform to the varying early unibody Mustangs. This means every car is slightly different. We have come to this conclusion after many years of installing and selling fiberglass body parts from many different manufacturers. Within 60 days of receipt, you must check fit before sanding or painting your new fiberglass pieces. If fiberglass parts have been sanded or painted they can no longer be sold as new for either race or show purposes. For this reason, the manufacturer will not warranty such parts and cannot be accepted for a return. Our policy for returning fiberglass parts is subject to a 15% restocking fee. In the event you feel the product is defective, our policy requires that you send the product back to us fully insured, heavily packaged to avoid damages and freight prepaid. A full investigation by Mustang Depot and the manufacturer will ensue. This includes fitting the item on the respective car, matching the part to the mold, and matching it with other items produced from the same mold. If it is determined that the product is not defective and is in reasonable constraints for finishing, the product will be returned at the customers expense. If it is deemed that the product is defective, a replacement will be sent at no cost and the return freight charges incurred by the customer will be refunded in the form of an in-store credit. All product that leaves Mustang Depot is inspected and confirmed to be in good condition, heavily packaged, and is insured for the value of the product. Noted on the package are clear neon stickers warning you to inspect the product in the presence of the carrier/driver. In the event damages occur, have the driver notate the damage on the documentation before signing. If the package was left at your door, you must notify the carrier immediately and file a damage claim. Do not return the product to Mustang Depot it is our policy to refuse items without a Return Authorization number. Retain all the packaging so the carrier can inspect the product. In most cases, small repairs can be made at a reasonable cost. Get an estimate, and submit the claim. Full loss claims are scrutinized much heavier. Please note: For fiberglass hoods, removal of stock hood springs and use of a prop rod and hood pins are highly recommended. For trunks, removal of springs or tension rods is highly suggested. Fiberglass has about a 6-8 week cure time when it comes out of the molds. So it's important to remove the parts from it's packaging upon receipt. Do not place anything on top of the part during storage. The part will attempt to take the shape of whatever it's stored on top of as well. Especially in warmer climates. The best place to store the part is on the car in it's intended position. This kit is intended for off-road use only. The word Mustang and the word Shelby are used on our site for descriptive purposes only and are not meant to imply any affiliation with either Ford Motor Company or Shelby American.  Click here for our  Return Policy

Back to Fiberglass

 

Featured Products

Universal


Auto Meter Gauges
for your Classic Mustang


Instructional DVD's
PAINTucation
by TV Host Kevin Tetz

1964-1973 Mustangs

Billet Hood Hinges
1965-1973 Mustang


Billet Hood Adjusters

1964-73 Mustang


Cowl Hood Grill
1965-1970 Mustang
available below


Ground Effects
1965-1968 Mustang

Spoiler Trunks Lids

1964-1970 Mustang


E2 Body Kits

1965-1966 Mustang


Eleanor Body Kits
1967-1968 Mustang


65 Shelby Replica Body Kit
1965-1966 Mustang


67 Shelby Replica Body Kit
1967 Mustang


68 Shelby Replica Body Kit
1968 Mustang


Front Aprons/Valances

1964-1970 Mustang

Fender Flares

1964-1968 Mustang


Side Scoops

1964-1970 Mustang


Tail Light Panels
1964-1970 Mustang

Website and Contents Copyright © 1998-2017 Automotive Internet Retailers, LLC DBA Mustang Depot, a division of Depot Automotive Group® All rights reserved. Ford®, Ford Mustang®, Mustang GT®, SVT Cobra®, Mach 1 Mustang®, Boss Mustang®, Cobra R®, Bullitt Mustang®, SN95®, S197®, V6 Mustang®, Fox Body Mustang®, GT350®, GT350R® and 5.0 Mustang® are registered trademarks of Ford Motor Company®. All Ford® logo products herein are strictly licensed by Ford® to the respective supplier. Saleen® is a registered trademark of Saleen® Incorporated. Roush® is a registered trademark of Roush® Enterprises Inc. Shelby®, GT500®, GT500E® and Eleanor® are registered trademarks of Carroll Hall Shelby Trust. All Shelby® logo products are licensed to the respective manufacturer or supplier by Carroll Shelby Licensing Inc, acting on behalf of Carroll Hall Shelby Trust. Mustang Depot has no affiliation with Ford Motor Company®, Roush® Enterprises, Shelby® American or Saleen®. Throughout our website and catalogs, these terms are used for identification purposes only. All products herein are reproduction parts unless specifically noted as "original" Ford® parts. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders. Information and prices are subject to change without notice. Photos are for graphical representation only and may not be the exact product you are ordering. Sales taxes are applicable to Nevada residents and in some cases where we drop ship from a warehouse within the same state as the customer. Thank you for choosing Mustang Depot!

Home   |   Terms and Conditions  |  Return Policy  |  Site Map   |   Email List   |   Fax/Mail   |   Links   |   Line Card   |   Contact Us 

Mustang Depot
2510 E. Sunset Rd #3
Las Vegas, NV 89120