Orders Over $100 get FREE SHIPPING and No Handling Fees

New Site  |  Contact Us  |  Login  |  Cart


    NOT AFFILIATED WITH FORD MOTOR COMPANY®


 

100% new 9-Plus heavy duty housing built to stock '05 and newer Mustang specs. Features include late model large bearing housing ends modified for retention of ABS equipment, all factory Ford suspension brackets installed for a perfect fit and finish including the Currie exclusive Johnny Joint® upper control arm mount that accepts the stock or aftermarket upper control arm. See CE-7015A for ABS equipped axles for this rearend, and CE-7015B-C for caliper brackets to bolt your stock brakes back on. Any standard 9" 3rd. member will bolt into this rearend, and any ABCS brake kit will bolt up - but at this time, only the stock brakes will retain the ABS. Also see our full line of control arms for this vehicle. Click here for aftermarket brake options with Late Model Torino Flange.


Click here to order Custom 9 Inch Third Member Assembly

9" Ring and Pinion Sets
Part # Description Price Qty Purchase

CE-FDM0507X
2005-2014 Mustang 9" Housing with Brackets and Axles
Crate Rearend housing and axle package for the 05-08 Mustang. Features the 9-Plus notch back heavy duty housing and 31 spline Currie performance axle package built to the stock overall width and pinion offset specs. for the vehicle. All stock suspension brackets are installed in the stock location for an easy bolt in installation, including a heavy duty upper control arm bracket with Johnny Joint® rod end installed for the upper control arm bracket. Housing includes all 3rd. member studs installed and the Torino style late model large bearing housing ends. Axles include the stock 5 lug wheel bolt pattern drilled in them, the proper stock size wheel studs installed, ¼” thick heavy duty bearing retainer plates, tapered Timken style wheel bearings pressed on, and the factory ABS reluctor wheels. Also included is the Currie caliper brackets that allow for the reuse of the factory Mustang rear disc brakes and ABS hardware. Units are sold each.
$1599.99/ea

CE-7015
2005-2014 Mustang 9" Housing with Brackets
100% new 9-Plus heavy duty housing built to stock '05 and newer Mustang specs. Features include late model large bearing housing ends modified for retention of ABS equipment, all factory Ford suspension brackets installed for a perfect fit and finish including the Currie exclusive Johnny Joint® upper control arm mount that accepts the stock or Currie Currectrac® upper control arm. See CE-7015A for ABS equipped axles for this rearend, and CE-7015B-C for caliper brackets to bolt your stock brakes back on. Any standard 9" 3rd. member will bolt into this rearend, and any ABCS brake kit will bolt up - but at this time, only the stock brakes will retain the ABS. Also see our full line of Currectrac® control arms for this vehicle.
$999.99/ea

CE-7015A
2005-2014 Mustang Forged Axle Set for 9 inch Currie Housing above ONLY
The Currie CE-0012 Performance axle package for use in the Performance 9" Ford rearend upgrade for the '05 and up Mustang. Axles are machined to accept the factory disc brakes for the vehicle, and Mustang ABS reluctor wheels for the factory ABS system are installed. Parts included in this kit are the 2 forged alloy 31 spline axle shafts, large "Set 20" tapered roller axle bearings, axle seals, 1/4" thick heavy duty bearing retainer plates, and the Currie standard 1/2"-20 wheel studs. Sold as a set (pair) of axles and all hardware. Use with the CE-7015 or CE-7015H housing, and the CE-7015B-C caliper brackets. Available optionally are 1/2"-20 x 3" long wheel studs, as well as 33, 35, and 40 spline axles. Contact your salesman for further details about these options.
$559.99/ea

CE-7015B-C
2005-2014 Mustang Caliper Brackets for putting on Original Brakes on the 9 inch Housing Above ONLY
These caliper brackets fit the Currie '05 and up Mustang performance 9" Ford rearend and allow you to retain your stock rear disc brakes. Brackets feature provisions for the stock ABS reader to bolt on in the stock location for proper function of the ABS. Finished in silver powder coat. Sold in pairs.
$119.99/ea

Back to Rear End Parts

Hot Mustang Mods

Universal


Snow Performance Boost Cooler Kits


Auto Meter Gauges

Mustang Mods

Hoods
2010-2014 Mustang®

Cup Holder Trim
Boss & Shelby
2010-2014 Mustang


Billet Grills
2010-2014 Mustang®

Power Packages
2010-2014 Mustang®

Street Scene Body Kit
2010-2014 Mustang


9 Inch Conversions
2005-2014 Mustang®


Intake / Tuner Combo Kits
2010-2014 Mustang®
Click for SUPERCHARGERS: Vortech V-1 Series Supercharger
Vortech Superchargers

2010-2014 Mustang®

Printed Car Covers
2010-2014 Mustang

Custom Arm Rests with Logos
2005-2009 Mustang

Check Engine Light Eliminator

2010-2014 Mustang

Logo Trunk Mats
2010-2014 Mustang

JBA & BBK X Pipes
2010-2014 Mustang®

Website and Contents Copyright © 1998-2019 Automotive Internet Retailers, LLC DBA Mustang Depot. All rights reserved. Click here for full disclaimer,trademark and terms of use of our site. State of California Proposition 65 Warning

Home   |   Terms and Conditions  |  Return Policy  |  Site Map   |   Email List   |   Fax/Mail   |   Links   |   Line Card   |   About Us  |  Contact Us 

Mustang Depot
2510 E. Sunset Rd #3
Las Vegas, NV 89120