Chassisworks FAB9 direct fit, fabricated 9" housing offers
exceptional performance, reliability, and adjustability for 1979 to 2004
Mustang®s and other Fox chassis vehicles. Shown above with the optional back
bracing installed. Options include: mild steel or 4130
chromoly construction, urethane bushing or spherical bearing upper arm
mounts, and the drag race ready anti-roll bar and wheelie bar mounting assembly.
Matching Currie 31 Splined Axle Kits. Also needed new
9" Third Member Kit
Uses Late Big Ford Drag Style Housing Ends (requires SET-20
or aftermarket externally 3.150" Bearing Bore, 2.50" Brake Offset
Dimensions given are for standard stock widths. Housing
widths are available 62" to a minimum of 56".
Wheel-to-wheel dimension calculated using 1/4" thick hats.
Housing only dimension is measured to outside surfaces of
Prices listed are for bare metal, assembled housings.
When selecting the Back bracing option, you must select the
bracing relative to the housing construction. (ex if you select the Mild
Steel Housing and desire the back bracing, you must select the mild steel
back bracing. Likewise on the Chomoly).
Additional charge for installed back brace
on housings below.
Use drop down menu to select Mild Steel Bracing $150,
or Chromoly $200
Back to Rear Ends
Website and Contents Copyright © 1998-2018 Automotive Internet Retailers,
LLC DBA Mustang Depot, a division of
Depot Automotive Group®
All rights reserved. Ford®,
SVT Cobra®, Mach 1 Mustang®, Boss Mustang®, Cobra R®, Bullitt
Mustang®, SN95®, S197®, V6 Mustang®, Fox Body Mustang®, GT350®,
GT350R® and 5.0 Mustang® are registered trademarks of Ford Motor
Company®. All Ford® logo products herein are strictly licensed by
Ford® to the respective supplier. Saleen® is a registered trademark
of Saleen® Incorporated. Roush® is a registered trademark of Roush®
Enterprises Inc. Shelby®, GT500®, GT500E®
are registered trademarks of Carroll Hall Shelby Trust. All Shelby®
logo products are licensed to the respective manufacturer or
supplier by Carroll Shelby Licensing Inc, acting on behalf of
Carroll Hall Shelby Trust. Mustang Depot has no affiliation with
Ford Motor Company®,
American or Saleen®.
Throughout our website and catalogs, these terms are used for
identification purposes only.
products herein are reproduction parts unless specifically noted as
parts. Other products and companies referred to herein are
trademarks or registered trademarks of their respective companies or
mark holders. Information and prices are subject to change without
notice. Photos are for graphical representation only and may not be
the exact product you are ordering. Sales taxes are applicable to
Nevada residents and in some cases where we drop ship from a
warehouse within the same state as the customer. Thank you for
choosing Mustang Depot!