| |||||||
|
|
Notice on "All" Mustang Hoods Hood will need to be fitted, sanded, primed, and painted. After paint installation time is approximately 1/2 hour. Hoods will have functional "Ram Air" when noted. Please allow 7-10 days delivery. Some hoods come with grills to fill in the holes. For the 2005-Up line, the following hoods that have mesh grill on top Shelby GT, GTR, Cobra Roadster, Spyder, Mach 1, Mach 2, SVT Style, Cobra Jet 351 (scoop has stailess steel grill just like the OEM 68-69 Cobra Jet). It's recommended when running a fiberglass hood, to use hood pins. The only pictures we have available are the ones represented below. Please Note: Due to the delicate nature of shipping fiberglass it's important to note the following damage policy. In all cases, Mustang Depot pre-inspects all products for damages prior to shipping. If you receive a package that has been damaged, if the opportunity exists, please notify the driver prior to him leaving. This will speed up the damage claim process and in some cases, they will not even accept the claim without the damage notation from the driver. It's best to open the package in front of the driver. We insure the products full value and it is the responsibility of the carrier to reimburse losses. Damage claim losses are not Mustang Depot's responsibility. Please keep the product and packaging in the original condition in which you receive it, for investigation by the freight company responsible. The claim cannot be paid if the packaging is not present! Please call with the claim number to get the process started for reimbursement 702-262-0011! Shipping Charges not included in price Please Note: Fiberglass body parts do not fit the same as stamped steel parts. While they can be finished to show quality, fiberglass body parts are built closer to race car standards than show car standards. We have come to this conclusion after many years of installing and selling fiberglass body parts from many different manufacturers. Check fit before sanding or painting your new fiberglass pieces. If fiberglass parts have been sanded or painted they can no longer be sold as new for either race or show purposes. For this reason, the manufacturer will not warranty such parts. Our policy for returning fiberglass parts is limited to the purchase price of the unit. All freight charges incurred are the responsibility of the purchaser/customer. For fiberglass hoods, removal of stock hood springs and use of a prop rod and hood pins are highly recommended. Mustang Depot is not affiliated with Ford Motor Company. All products herein are reproductions and not affiliated directly with either Ford or Shelby American unless noted. All Ford products are licensed by Ford through the respective manufacturer. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.
|
|