1982-93
LED Brake Light Only Kit Non-Sequential 112 LEDs on EACH board. 224 LED per system
$124.95/set
CLE0062
1982-93
LED Light Kit Non-Sequential The entire upper portion of the lens housing
contains three boards containing 232 LEDs PER SIDE. In addition, the
reverse light contains 24 white super bright LEDs The turn signal
operates all three sections With the brake applied, the entire upper
section operates along with the large brake light.
$289.95/set
CLE0062S
1982-93
LED Light Kit Sequential
Beginning with the inner lens, this system sequences
outward fill the entire upper section with 5mm super bright red LEDs. In
addition, the reverse light contains 24 white super bright LEDs. With
the brake applied the entire upper section along with the entire large
lens light up. With the sequence in operation, and the brakes are
applied, the lower section of the large board will remain in brake mode.
This gives a brake light on both sides. Should you wish to stop the
sequence mode, our new control unit contains a button allowing the
sequence mode to operate as the non sequential. Sequence mode is return
with a push of the button.
Installation Instructions
1982-93
LED Brake Light Only Kit Non-Sequential
