NOT AFFILIATED WITH FORD MOTOR COMPANY®
 


 
Follow Us


Shop

 


Cart

Interest






Click here for different hood options


1999-2004 Mustang® 2 3/4" Wide Fender Flare Kits and Spoilers
These new flares for 1999 – 2004 Mustang®s let you fit 315's in front and up to 335's in the rear.

MR-99FF
1999-2004 Mustang Fiberglass Front Fender Set
$395.00/pr

MR-99RF
1999-2004 Mustang Fiberglass Rear Fender Set
$395.00/pr

MR-99RS
1999-2004 Mustang Fiberglass Rear Spoiler
$399.00/ea

MR-99CS
1999-2004 Mustang Fiberglass Chin Spoiler
 
$199.00/ea

MR-99FS
1999-2004 Mustang Fiberglass Front Splitter $249.00/ea

1994-1998 Mustang® 2 3/4" Wide Fender Flare Kits and Spoilers
These new flares for 1994 – 1998 Mustang®s let you fit 315's in front and up to 335's in the rear.
Part # Description Price

Qty

Purchase


MR-94FF
1994-1998 Mustang Fiberglass Front Fender Set
 
$395.00/pr

MR-94RF
1994-1998 Mustang Fiberglass Rear Fender Set
 
$395.00/pr

1979-1993 Mustang® Fox Body Wide Fender and Flare Kits
Part # Description Price

Qty

Purchase

MR-79FF 1979-1993 Mustang Fiberglass Front Fender Set w/ 1.5" Flare $634.99/pr
MR-79RF 1979-1993 Mustang Fiberglass Rear Quarter Panel Set w/ 1.5" Flare $519.99/pr
MR-879 1979-1993 Mustang Fiberglass Front Fender Set w/ 3" Flare $634.99/pr
MR-888 1979-1993 Mustang Fiberglass Rear Quarter Panel Set w/ 3" Flare $519.99/pr

Back to Exterior

Fiberglass body parts do not fit the same as stamped steel parts. While they can be finished to show quality, fiberglass body parts are built closer to race car standards than show car standards. Although fiberglass parts are easy to work with, they can require substantial work to conform to the varying early unibody Mustang®s. This means every car is slightly different. We have come to this conclusion after many years of installing and selling fiberglass body parts from many different manufacturers. Within 30 days of receipt, you must check fit before sanding or painting your new fiberglass pieces. If fiberglass parts have been sanded or painted they can no longer be sold as new for either race or show purposes. For this reason, the manufacturer will not warranty such parts and cannot be accepted for a return. Our policy for returning fiberglass parts is limited to the purchase price of the unit on Exchange. A 20% restocking fee is applicable for the monetary return of funds. In the event you feel the product is defective, our policy requires that you send the product back to us fully insured, heavily packaged to avoid damages and freight prepaid. A full investigation by Mustang Depot and the manufacturer will ensue. This includes fitting the item on the respective car, matching the part to the mold, and matching it with other items produced from the same mold. If it is determined that the product is not defective and is in reasonable constraints for finishing, the product will be returned at the customers expense. If it is deemed that the product is defective, a replacement will be sent at no cost, and .the return freight charges incurred by the customer will be refunded in the form of an in-store credit. All product that leaves Mustang Depot is inspected and confirmed to be in good condition, heavily packaged, and is insured for the value of the product. Noted on the package are clear neon stickers warning you to inspect the product in the presence of the carrier/driver. In the event damages occur, have the driver notate the damage. If the package was left at your door, you must notify the carrier immediately and file a damage claim. Do not return the product to Mustang Depot it is our policy to refuse returns without a Return Authorization number. Retain all the packaging so the carrier can inspect the product. In most cases, small repairs can be made at a reasonable cost. Get an estimate, and submit the claim. Full loss claims are scrutinized much heavier. Please note: For fiberglass hoods, removal of stock hood springs and use of a prop rod and hood pins are highly recommended. for trunks, removal of springs or tension rods is highly suggested. Fiberglass has about a 6-8 week cure time when it comes out of the molds. So it's important to remove the parts from it's packaging immediately. Do not place anything on top of the part during storage. The part will attempt to take the shape of whatever it's stored on top of as well. Especially in warmer climates. The best place to store the part is on the car in it's intended position. The word Mustang® and the word Shelby are used on our site for descriptive purposes only and are not meant to imply any affiliation with either Ford Motor Company or Shelby American.  Click here for our  Return Policy

 

 

Hot Mods

Universal


Snow Performance Boost Cooler Kits


Auto Meter Gauges

Mustang Mods

Clutch Quadrants
BBK
1979-04 Mustang®

Headers - JBA


Superchargers
Vortech
1986-2004 Mustang®


Trunk Mats
1979-2004 Mustang®

Headers
Ceramic Shorty
1986-2004 Mustang®

Only $199

 Headlight Sets
1987-1993 Mustang®
Only $99.99/set

Trailing Arms
Tubular

1979-2004 Mustang
Only $129.99/set

Power Packages
1999-2004 Mustang®
Tuner, Intake and Exhaust

Hoods 
1979-2004 Mustang®

Tail Lenses
Ford Tooling
1987-93 Mustang

CenterForce Clutches


Stripes, Rear Letters
1994-2004 Mustang®

Website and Contents Copyright © 1998-2014 Automotive Internet Retailers, LLC DBA Mustang Depot, a division of Depot Automotive Group® All rights reserved. Ford®, Ford Mustang®, Mustang GT®, SVT Cobra®, Mach 1 Mustang®, Boss Mustang®, Cobra R®, Bullitt Mustang®, SN95®, S197®, V6 Mustang®, Fox Body Mustang®, and 5.0 Mustang® are registered trademarks of Ford Motor Company®. All Ford® logo products herein are strictly licensed by Ford® to the respective supplier. Saleen® is a registered trademark of Saleen® Incorporated. Roush® is a registered trademark of Roush® Enterprises Inc. Shelby®, GT500®, GT500E®, GT350® and Eleanor® are registered trademarks of Carroll Hall Shelby Trust. All Shelby® logo products are licensed to the respective manufacturer or supplier by Carroll Shelby Licensing Inc, acting on behalf of Carroll Hall Shelby Trust. Mustang Depot has no affiliation with Ford Motor Company®, Roush® Enterprises, Shelby® American or Saleen®. Throughout our website and catalogs, these terms are used for identification purposes only. All products herein are reproduction parts unless specifically noted as "original" Ford® parts. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders. Information and prices are subject to change without notice. Photos are for graphical representation only and may not be the exact product you are ordering. Sales taxes are applicable to Nevada residents and in some cases where we drop ship from a warehouse within the same state as the customer. Thank you for choosing Mustang Depot!

Home   |   Terms and Conditions  |  Return Policy  |  SiteMap   |   Email List   |   Fax/Mail   |   Links   |   Linecard   |   Contact Us 

 

Follow Us

Mustang Depot 2510 E. Sunset Rd #3 Las Vegas, NV 89120