Orders Over $100 get FREE SHIPPING and No Handling Fees

Home  |  About Us  |  Contact Us  |  Login  |  Cart


    NOT AFFILIATED WITH FORD MOTOR COMPANY®


1964-1973 Mustang Subframe Conectors
Stiffen the complete subframe of your Mustang with this bolt-in Stiffener. Bolts to Subframe Connectors to further stiffen the unibody.

Part # Description Price Qty Purchase


C5ZZ-5479-A

1964-1970 Mustang Sub-frame Connectors Coupe/Fastback $169.99/pr
TCP Subframe Connectors

Fits:

  • 1964 1/2 - 1970 Mustang and 1967-70 Cougar

During acceleration and cornering your car's chassis has a tendency to flex or twist because of the unibody design. Our Subframe connectors help to strength the body and consequently reduce or eliminate the flexing. By welding our Kit 1 to the front and rear subframes we can strengthen the weak portion of the chassis. The tubular construction of the subframe connectors resist twisting much better than the flat portion of the under carriage. This component is available for all models of Mustang's (Yes, that means convertibles too) from 1964 1/2 through 1970.

For Fastback and Coupe owners we have our Kit 2 (center brace) available. This center section bolts into the existing Kit 1. In other words, you cannot just order the center section without Kit 1.  We have designed this section to brace the chassis even more. With our Kit 2 installed you get maximum chassis rigidity without going to the extreme of a full roll cage, essentially making the front and rear subframes one piece. A bolt-in center brace gives strength and rigidity while still allowing access to the exhaust, driveline and transmission.

A quality built product with quality performance. 0.125" wall tubing with all TIG-welded construction for superior structural strength. Powder coated for longevity and aesthetics. May be purchased in two stages.

NOTE: Your exhaust system may require alterations to allow clearance for kit 2(center section).
NOTE: The outer section (Kit1, Kit1C) are "WELD-IN" units and the center section (Kit 2) is a "BOLT-IN" unit.

 

Part # Description Price Qty Purchase


TCP-DSL-01

1964-1970 Mustang Drive Shaft Safety Loop $99.99/set


TCP-SUBFC-01

1964-1970 Mustang Coupes/Fastbacks Subframe Connectors Kit 1 (outside section / weld-in)
$269.99/set


TCP-SUBCS-01

1964-1970 Mustang Coupes/Fastbacks Subframe Connectors Kit 2 (center section / bolt-in)  Exhaust modification is generally required.

$319.99/ea


TCP-SUBFC-02

1964-1970 Mustang Convertible Subframe Connectors Kit 1C
(outside / weld-in)

$299.99/set


TCP-SUBCS-03

1964-1970 Mustang Convertible Subframe Connectors Kit 2C  Exhaust modification is generally required.

$329.99/ea


TCP-SUBFC-51

1964-1970 Mustang Coupes/Fastbacks Subframe Connectors Complete Package Kit
(Includes driveshaft safety loop)
 Exhaust modification is generally required.

 

$669.99/ea


TCP-SUBFC-52

1964-1970 Mustang Convertible Subframe Connectors Complete Package Kit  Exhaust modification is generally required.

$599.99/ea
Part # Description Price Qty Purchase


MOD-FMUAA30200
1964-1970 Mustang MOD XL Sub-frame Connectors Coupe/Fastback
$389.99/set


MOD-FMUAA30400
1964-1970 Mustang MOD Coupe/Fastback Center X Brace

MMI has developed a new add on to the hard top mustang subframe connector kit. Now you can get the best of both worlds, the MMI X-brace and the MMI full length subframe connectors. Get the best for your mustang, MMI. Exhaust modification is generally required.
$399.99/set


MOD-FMUAA30300

1964-1970 Mustang MOD XL Sub-frame Connectors Convertible
$389.99/set

MOD-FMUAA30500
1964-1970 Mustang MOD Convertible Center X Brace

MMI has developed a new add on to the hard top mustang subframe connector kit. Now you can get the best of both worlds, the MMI X-brace and the MMI full length subframe connectors. Get the best for your mustang, MMI. Exhaust modification is generally required.
$399.99/set
Shown in blue to show detail. These actually come raw, unpainted, uncoated.
Heidt's Subframe Connectors stiffen the unibody and are completely bolt-on, with no cutting or floor modifications. Attach to front subframe and rear spring mounts or 4-link brackets when used with Heidt's 4-Link Kit. Shown in blue to show detail. These actually come raw, unpainted, uncoated.
Part # Description Price Qty Purchase


HDT-RM102

1964-1970 Mustang Heidt's Sub-frame Connectors Coupe/Fastback $254.99/set


HDT-RM103

1964-1970 Mustang Heidt's Sub-frame Connectors Convertible $254.99/set


HDT-RM023

1964-1970 Mustang Heidt's Chassis Stiffener
Requires either HDT-RM103 or HDT-RM102 above
$289.99/set

Back to Suspension

 

 

Featured Products

1965-1973 Mustangs

Tubular Front End Conversion
1964-1973 Mustang
Only $1349

Shock Tower Mounts
BILLET

1964-1970 Mustang


Ultra Suspension Kits
1964-1973 Mustang & Cougar
3 Stages of Performance - Front/Rear
MILD TO WILD


Watts Link Kit
1965-1970 Mustangs

Coil Spring Isolators
New Improved
1965-1973 Mustang

TCP Suspension
1965-1970 Mustang

Ultra Street Force
Suspension Kit

1964-1970 Mustang

Shock Tower Braces
1965-1970 Mustang

TCP Coilover Conversion
1965-1970 Mustang
Coil-Spring, Coil-Over & Air Ride

UCA Lowering Jigs
Only $24.99


TCP Rack & Pinions
1964-1970 Mustang


Bolt In Coilovers
TCP
1964-1973 Mustang & Cougar

TCP G-Bar
3 Levels of Performance
& Air Ride Too!
coil.gif (4410 bytes)
Coil Springs
Progressive Rate
 

Website and Contents Copyright © 1998-2017 Automotive Internet Retailers, LLC DBA Mustang Depot, a division of Depot Automotive Group® All rights reserved. Ford®, Ford Mustang®, Mustang GT®, SVT Cobra®, Mach 1 Mustang®, Boss Mustang®, Cobra R®, Bullitt Mustang®, SN95®, S197®, V6 Mustang®, Fox Body Mustang®, GT350®, GT350R® and 5.0 Mustang® are registered trademarks of Ford Motor Company®. All Ford® logo products herein are strictly licensed by Ford® to the respective supplier. Saleen® is a registered trademark of Saleen® Incorporated. Roush® is a registered trademark of Roush® Enterprises Inc. Shelby®, GT500®, GT500E® and Eleanor® are registered trademarks of Carroll Hall Shelby Trust. All Shelby® logo products are licensed to the respective manufacturer or supplier by Carroll Shelby Licensing Inc, acting on behalf of Carroll Hall Shelby Trust. Mustang Depot has no affiliation with Ford Motor Company®, Roush® Enterprises, Shelby® American or Saleen®. Throughout our website and catalogs, these terms are used for identification purposes only. All products herein are reproduction parts unless specifically noted as "original" Ford® parts. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders. Information and prices are subject to change without notice. Photos are for graphical representation only and may not be the exact product you are ordering. Sales taxes are applicable to Nevada residents and in some cases where we drop ship from a warehouse within the same state as the customer. Thank you for choosing Mustang Depot!

Home   |   Terms and Conditions  |  Return Policy  |  Site Map   |   Email List   |   Fax/Mail   |   Links   |   Line Card   |   Contact Us 


Mustang Depot
2510 E. Sunset Rd #3
Las Vegas, NV 89120

Mustang Depot, Auto Parts & Supplies  New, Las Vegas, NV