NOT AFFILIATED WITH FORD MOTOR COMPANY®
 


 
Follow Us


Shop

 


Cart

Interest






Small Bearing Axles Flange Large Bearing Axle Flange Large Bearing Axle Flange
(Late Model Torino)
Additional individual components for completing your rearend

Third Member Packages

Spring Plates

Axle Kits Torque Arm Kits
G-Bar Kits Front Air Ride Kits
Leaf Springs Rear Air Ride Kits
Torino Flange Brakes U-Bolts



Currie Enterprise's Complete Stock Replacement Housings. Special Order 2 weeks delivery!

Disc Brake Package Includes: Rear Disc Brake Kit with Parking Brake and Flex Lines
Axles include: Forged Axles, Bearings, Seals, Retainer Plate
(Assembled - Ready to Install)
Accessory Package Includes: Ubolts, Spring Plates, Axle Vent, Axle Vent Hose, Rear Brake Lines & Rear Brake Hose w/Dist Block

Part # Description Price Qty Purchase

CE-2000EMR
1964-65 Mustang Replica 9" Housing Small Bearing - Includes Spring Pads Click here to order Third Member



For the Mustang afficianado that wants the best, our '64-'65 Mustang replica housings should interest you! This housing is 100% new and features our round back housing center, tubes that are swedged from 3" down to 2 1/4", billet small bearing housing ends, exact duplicate leaf spring pads mounted and factory location and thread size vent hole installed! The only thing we didn't duplicate is Ford's ugly factory welds! This housing can be used with all new Currie 3rd. member, axles and brakes, or any 9" 3rd. member and your original '64-'65 Mustang's 8" or 9" rearend's axles and brakes. If rear disc brakes are selected, rear disc parking brake cables (
1964-66= C6ZZ-2A635-RDB & 1967-70 = C7ZZ-2A635-RDB) are recommended.

$559.99/ea


CE-2000EMN
1966 Mustang Replica 9" Housing Small Bearing - Includes Spring Pads Click here to order Third Member



For the Mustang afficianado that wants the best, our '66 Mustang replica housings should interest you! This housing is 100% new and features our notch back housing center, tubes that are swedged from 3" down to 2 1/4", billet small bearing housing ends, exact duplicate leaf spring pads mounted and factory location and thread size vent hole installed! The only thing we didn't duplicate is Ford's ugly factory welds! This housing can be used with all new Currie 3rd. member, axles and brakes, or any 9" 3rd. member and your original '66 Mustang's 8" or 9" rearend's axles and brakes. If rear disc brakes are selected, rear disc parking brake cables (
1964-66= C6ZZ-2A635-RDB & 1967-70 = C7ZZ-2A635-RDB) are recommended.

$559.99/ea


CE-2000LM
1967-1970 Mustang Replica 9" Housing Small Bearing - Includes Spring Pads Click here to order Third Member



For the Mustang afficianado that wants the best, our '67-'70 Mustang replica housings should interest you! This housing is 100% new and features our notch back housing center, tubes that are swedged from 3" down to 2 3/4", billet small bearing housing ends, exact duplicate leaf spring pads mounted and factory location and thread size vent hole installed! The only thing we didn't duplicate is Ford's ugly factory welds! This housing can be used with all new Currie 3rd. member, axles and brakes, or any 9" 3rd. member and your original '67-'70 Mustang's 8" or 9" rearend's axles and brakes. If rear disc brakes are selected, rear disc parking brake cables (
1964-66= C6ZZ-2A635-RDB & 1967-70 = C7ZZ-2A635-RDB) are recommended.

$559.99/ea


Currie Enterprise's Rear End Package - Special Order 2 weeks delivery!
Disc Brake Package Includes: Rear Disc Brake Kit with Parking Brake and Flex Lines
Axles include: Forged Axles, Bearings, Seals, Retainer Plate
(Assembled - Ready to Install)

Part # Description Price Qty Purchase

CE-FDM6466X
1965-66 Mustang 9" Currie Performance Rear End Package with 31 Spline Large Bearing Torino Flange (will not work with stock brakes)

Includes Spring Pads Click here to order Third Member
Features the 9-Plus notch back heavy duty housing and 31 spline performance axle package built to the stock overall width and pinion offset specs. of the vehicle. Heavy duty 2 1/4” wide leaf spring pads are installed in the stock location for an easy bolt in installation. Housing includes all 3rd. member studs installed and the Torino style late model large bearing housing ends. Axles include the stock 5 on 4 1/2” wheel bolt pattern drilled in them, wheel studs installed, ¼” thick heavy duty bearing retainer plates, and tapered Timken style wheel bearings pressed on. This unit will allow for the use of any ABCS brake kit including the 11” drum brakes, 11” Ford Explorer disc brakes, or Wilwood disc brakes.

$1114.99/ea


CE-FDM6770X
 
1967-70 Mustang 9" Currie Performance Rear End Package 31 Spline Large Bearing Torino Flange (will not work with stock brakes)

Includes Spring Pads Click here to order Third Member
Features the 9-Plus notch back heavy duty housing and 31 spline performance axle package built to the stock overall width and pinion offset specs. of the vehicle. Heavy duty 2 1/4” wide leaf spring pads are installed in the stock location for an easy bolt in installation. Housing includes all 3rd. member studs installed and the Torino style late model large bearing housing ends. Axles include the stock 5 on 4 1/2” wheel bolt pattern drilled in them, wheel studs installed, ¼” thick heavy duty bearing retainer plates, and tapered Timken style wheel bearings pressed on. This unit will allow for the use of any ABCS brake kit including the 11” drum brakes, 11” Ford Explorer disc brakes, or Wilwood disc brakes.

$1114.99/ea


CE-FDM7173X
 
1971-73 Mustang 9" Currie Performance Rear End Package 31 Spline Large Bearing Torino Flange (will not work with stock brakes)

Includes Spring Pads Click here to order Third Member
Features the 9-Plus notch back heavy duty housing and 31 spline performance axle package built to the stock overall width and pinion offset specs. of the vehicle. Heavy duty 2 1/4” wide leaf spring pads are installed in the stock location for an easy bolt in installation. Housing includes all 3rd. member studs installed and the Torino style late model large bearing housing ends. Axles include the stock 5 on 4 1/2” wheel bolt pattern drilled in them, wheel studs installed, ¼” thick heavy duty bearing retainer plates, and tapered Timken style wheel bearings pressed on. This unit will allow for the use of any ABCS brake kit including the 11” drum brakes, 11” Ford Explorer disc brakes, or Wilwood disc brakes.

$1114.99/ea


CE-FDB6677X
 
1966-77 Ford Bronco 9" Currie Performance Rear End Package 31 Spline Large Bearing Torino Flange (will not work with stock brakes)

Includes Spring Pads Click here to order Third Member
66-77 Ford Bronco - Features the 9-Plus round back heavy duty housing and 31 spline “Currie Axle” package built to the stock overall width and pinion offset specs. of the vehicle. Heavy duty 2 1/4” wide leaf spring pads are installed on the unit and shock mounts are sent loose so that you may test fit them with your brakes before welding them on. Housing includes all 3rd. member studs installed and the Torino style late model large bearing housing ends. Axles include the stock 5 on 5 ½” wheel bolt pattern drilled in them, wheel studs installed, ¼” thick heavy duty bearing retainer plates, and tapered Timken style wheel bearings pressed on. This unit will allow for the use of any ABCS brake kit including the 11” drum brakes, 11” Ford Explorer disc brakes, or Wilwood disc brakes.

$1129.99/ea



Chassisworks FAB9
TM High Performance Rear End Housings -

The first affordable fabricated rearend housings are now available. FAB9TM housings are stronger than stock housings and five pounds lighter! The 3” axle tubes are supported by internal gusset plates built into the case, giving the tubes additional strength. They are fully machined after welding for tighter tolerance, and use studs to mount the third member. Engineered to accept all 9”, Ford-style differentials, each FAB9TM includes a fully welded center section with axle tubes, housing-filler assembly, vent, drain plug, leaf-spring pads, Ford big-bearing, late-model Torino housing ends, and torque-arm brackets installed. Optionally available is a 2-piece, tapered back brace. The triangle formed by the back brace dramatically increases rigidity over unsupported axle tubes. FAB9TM housings can also be ordered as individual components to suit the needs of your special application. Available in mild steel or 4130 chromemoly. The 4130 rearend housings are suggested for vehicles weighing more than 3500 lbs., and/or developing 650-plus horsepower. Please note, the optional back bracing will not work with TCP's G-Bar and Air-Bar suspension systems.

Part # Description Price Qty Purchase
CW-84M10-101 1965-66 Mustang, Comet, Falcon, Ranchero Fab9 Mild Steel Housing Large Bearing Torino Flange - Direct Bolt In Includes Spring Pads Click here to order Third Member


$749.99/ea

CW-84M10-111 1965-66 Mustang, Comet, Falcon, Ranchero Fab9 4160 Chromemoly Housing Large Bearing Torino Flange - Direct Bolt In Includes Spring Pads Click here to order Third Member


$999.99/ea

CW-84M20-101 1967-70 Mustang, Cougar Fab9 Mild Steel Housing Large Bearing Torino Flange - Direct Bolt In Includes Spring Pads Click here to order Third Member


$749.99/ea

CW-84M20-111 1967-70 Mustang, Cougar Fab9 4160 Chromemoly Housing Large Bearing Torino Flange - Direct Bolt In Includes Spring Pads Click here to order Third Member


$999.99/ea

CW-84M30-101 1971-73 Mustang, Cougar Fab9 Mild Steel Housing Large Bearing Torino Flange - Direct Bolt In Includes Spring Pads Click here to order Third Member


$749.99/ea

CW-84M30-111 1971-73 Mustang, Cougar Fab9 4160 Chromemoly Housing Large Bearing Torino Flange - Direct Bolt In Includes Spring Pads Click here to order Third Member


$999.99/ea

Back to Rear End Parts

*California customer may have additional shipping charges applied, or sales taxes due. These are special order and require 2 weeks in house assembly time.

 

 

Featured Products

Universal


Auto Meter Gauges
for your Classic Mustang


Instructional DVD's
PAINTucation
by TV Host Kevin Tetz

1965-73 Mustangs


Rear End Packages

Complete Currie
1965-70 Mustang


Axles

1965-1970 Mustang


Ring & Pinion Set

1965-1970 Mustang


Bolt-In IRS
Pro-G Rear Suspension System

1965-1970 Mustang


Third Members

1965-1970 Mustang


Maier Extreme
Rear Suspension
1965-1970 Mustang


TCP G-Bar Kit

1965-1970 Mustang


Housings

1965-1970 Mustang


TCP Rear Coil Over Kit

1965-1970 Mustang

Website and Contents Copyright © 1998-2014 Automotive Internet Retailers, LLC DBA Mustang Depot, a division of Depot Automotive Group® All rights reserved. Ford®, Ford Mustang®, Mustang GT®, SVT Cobra®, Mach 1 Mustang®, Boss Mustang®, Cobra R®, Bullitt Mustang®, SN95®, S197®, V6 Mustang®, Fox Body Mustang®, and 5.0 Mustang® are registered trademarks of Ford Motor Company®. All Ford® logo products herein are strictly licensed by Ford® to the respective supplier. Saleen® is a registered trademark of Saleen® Incorporated. Roush® is a registered trademark of Roush® Enterprises Inc. Shelby®, GT500®, GT500E®, GT350® and Eleanor® are registered trademarks of Carroll Hall Shelby Trust. All Shelby® logo products are licensed to the respective manufacturer or supplier by Carroll Shelby Licensing Inc, acting on behalf of Carroll Hall Shelby Trust. Mustang Depot has no affiliation with Ford Motor Company®, Roush® Enterprises, Shelby® American or Saleen®. Throughout our website and catalogs, these terms are used for identification purposes only. All products herein are reproduction parts unless specifically noted as "original" Ford® parts. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders. Information and prices are subject to change without notice. Photos are for graphical representation only and may not be the exact product you are ordering. Sales taxes are applicable to Nevada residents and in some cases where we drop ship from a warehouse within the same state as the customer. Thank you for choosing Mustang Depot!

 

Home   |   Terms and Conditions  |  Return Policy  |  SiteMap   |   Email List   |   Fax/Mail   |   Links   |   Linecard   |   Contact Us 

 

Follow Us

Mustang Depot 2510 E. Sunset Rd #3 Las Vegas, NV 89120