NOT AFFILIATED WITH FORD MOTOR COMPANY®
 


 
Follow Us


 

Shop

 


Cart

Interest








1965-1966 Mustang 6 Gauge Instrument Clusters - Billet & Plastic Versions


New Plastic Version Available Below!


When order your new 6 gauge instrument bezel below, you are given the option of adding gauges which come in their original Autometer boxes, or having your gauge bezel assembled and wired by Mustang Depot. The picture above shows the back of the assembly with labeled leads and a 12 pin connector. Although not shown, the opposing connector is included with the pins to wire into the car. Your gauge cluster will then become plug and play.

 JME Instrument Bezels have been discontinued.
We offer high quality alternatives with much more competitive pricing below!

Better than the original, our 1965-1966 Mustang Billet 6 Gauge Bezel is the ultimate in instrumentation display. This 1965-1966 Mustang 6 Gauge Billet Bezel is machined out of T6061 billet aluminum block on a CNC machine. It has been modeled and produced to exacting factory specifications and can be included with gauges below. If you need more gauges, consider our pillar & dash gauge pods.
 





Billet Bezels with Auto Meter American Muscle Gauges Camera Case Billet Bezel with Traditional Chrome Gauges (Left) & Sport Comp Gauge (Right) Billet Bezels with GT Carbon Fiber Series Gauges Billet Bezels with Auto Meter Phantom Gauges (White Face, Black Trim) Brushed Aluminum Billet Bezel with Auto Meter Ultra Light Gauges (Silver Face) Billet Bezel with Auto Meter Carbon Fiber Gauges
  Polished Billet Aluminum Bezel.
  Camera Case and Brushed Aluminum Finish Options
  Gauge Options Included: AutoMeter UltraLight I & II, Phantom I & II, Carbon Fiber, Sport Comp I & II, Traditional Chrome or American Muscle Series Gauges
  All gauge kits below are preconfigured for the 6 gauge bezel. They include a 3 3/8" 160 mph Speedometer, a 10k Tachometer, 2 1/16" Fuel, Volt Meter, Oil Pressure, Water Temp. All gauges are automatically electric with the exception of the speedometer. You are given the option to go with either a mechanical or electric speedometer in the drop downs, which would include the pulse sender. All gauges which require a sender are included with the exception of the fuel and volt gauges. The fuel gauge is preconfigured to use the stock Ford in-tank sender 76-10ohm range not included. The tachometer lead will need to be run to the negative side of the ignition coil. The difference between the Version I and Version II 's mentioned above is the Version II's are backlit (only the numbers show up at night). American Muscle series and GT Carbon Fiber gauges which are also backlit. If it doesn't say II (ex Phantom II), this it's presumed to be a perimeter lighted gauge which means the entire gauge face is illuminated. On the perimeter lighted gauges, you can use LED replacement bulbs to get more color and make them really pop. Click here to view LED's and Order.
  High-beam and Turn Signals are LED.
  1 Year Warranty From Auto Meter On All Gauges from the manufacturer
  Bezel is Machined from Solid T6061 Billet Aluminum Block
  CNC Machine Cuts Basic Shape
  Gauge Holes Are Cut
  Installation Instructions

PLEASE NOTE

1965-1966 Mustang Billet Instrument Bezel Optional Accessories
Part # Description Price

Qty

Purchase


C5ZZ-6506024-AL

1965-1966 Mustang Glove Box Door with Brushed Aluminum Insert Sold Separately
Please note: If you are changing from the 1964.5-1965 Mustang concave glove box door, you will need a 1966 glove box door latch C5ZZ-6506072-B available by clicking here
$99.99/ea

1965-1966 Mustang In-dash 6 Gauge Instrument Bezels with Optional AutoMeter Gauges
Billet Aluminum Version - Machined from high quality T6061 billet aluminum block - Made in the USA
Part # Description Price

Qty

Purchase


  MD-MS220-01


1965-1966 Mustang 6 Gauge Billet Aluminum Instrument Bezel -  Made in USA
This In-Dash One Piece Machined Billet bezel is designed for 2 each 3 3/8" & 4 each 2 1/16" Gauges

Shown with AutoMeter Gauge Options available at varying costs listed in the drop down selections. Pre-assembly available. Please note: If you are changing from the 1964.5-1965 Mustang concave glove box door, you will need a 1966 glove box door latch C5ZZ-6506072-B available by clicking here. All glove boxes contained emblems with the exception of the Brushed Aluminum Face version.





$345.00/ea
Plastic Version - High quality injection molded plastic, just like your original. The aluminum face version has an actual aluminum face insert.



  C5ZZ-10838-6


1965-1966 Mustang 6 Gauge Plastic Instrument Bezel
This In-Dash plastic bezel is designed for 2 each 3 3/8" & 4 each 2 1/16" Gauges

Shown with AutoMeter Gauge Options (in billet bezel above) available at varying costs listed in the drop down selections. Pre-assembly available. Please note: If changing from the 1964.5-1965 Mustang wide sweeping style speedometers, you will need to bend the lower mounting tabs on the car, horizontal to the ground to allow for the mounting of this 6 gauge bezel. Also, if you are changing from the 1964.5-1965 Mustang concave glove box door, you will need a 1966 glove box door latch C5ZZ-6506072-B available by clicking here. All glove boxes contained emblems with the exception of the Brushed Aluminum Face version.





$174.99/ea

Back to Interior

 

Featured Products

Universal


Auto Meter Gauges
for your Classic Mustang


HushMat
Premium Dampening

1964-1973 Mustangs

6 Gauge Bezels
Billet or Plastic
1965-1966 Mustang

Sport & Sport R
Full Length Consoles

1965-1968 Mustang

Sport-R Series

Upholstery Kits
1964-1973 Mustang


1 Piece Headliners
1965-1968 Mustangs

Ultra Restoration Kit
1964-1968 Mustang
Interior, Suspension & Steering
All in One Kit!


Ultra Interior Kit
1965-1968 Mustang
Do it all at once and SAVE!

Pony Interior Kit
1965-1966 Mustang


Gauge Kits
AutoMeter / Classic Instruments
1965-1970 Mustang

Sport Seat Kits
Two Tone
with Carbon Fiber Look

Door Panel Sets

Two Tone Standard
with Carbon Fiber Look

Corbeau Seats

Procar Seats Rally
pedals.jpg (10588 bytes)
Pedal Cover Sets

Kickpanels
w/Speakers

C5ZZ-6504290-BK.gif (9144 bytes)
Dash Pads


Seat Belts
Mustang Logo

Gauge Pods

1965-1970 Mustang
New Vinyl Covered Option

Go Baby Go
Shift Knob
and Nitrous Switch

Website and Contents Copyright © 1998-2014 Automotive Internet Retailers, LLC DBA Mustang Depot, a division of Depot Automotive Group® All rights reserved. Ford®, Ford Mustang®, Mustang GT®, SVT Cobra®, Mach 1 Mustang®, Boss Mustang®, Cobra R®, Bullitt Mustang®, SN95®, S197®, V6 Mustang®, Fox Body Mustang®, and 5.0 Mustang® are registered trademarks of Ford Motor Company®. All Ford® logo products herein are strictly licensed by Ford® to the respective supplier. Saleen® is a registered trademark of Saleen® Incorporated. Roush® is a registered trademark of Roush® Enterprises Inc. Shelby®, GT500®, GT500E®, GT350® and Eleanor® are registered trademarks of Carroll Hall Shelby Trust. All Shelby® logo products are licensed to the respective manufacturer or supplier by Carroll Shelby Licensing Inc, acting on behalf of Carroll Hall Shelby Trust. Mustang Depot has no affiliation with Ford Motor Company®, Roush® Enterprises, Shelby® American or Saleen®. Throughout our website and catalogs, these terms are used for identification purposes only. All products herein are reproduction parts unless specifically noted as "original" Ford® parts. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders. Information and prices are subject to change without notice. Photos are for graphical representation only and may not be the exact product you are ordering. Sales taxes are applicable to Nevada residents and in some cases where we drop ship from a warehouse within the same state as the customer. Thank you for choosing Mustang Depot!

 

Home   |   Terms and Conditions  |  Return Policy  |  SiteMap   |   Email List   |   Fax/Mail   |   Links   |   Linecard   |   Contact Us 

 

Follow Us

Mustang Depot 2510 E. Sunset Rd #3 Las Vegas, NV 89120