 |
|
|
|
DISCLAIMER - The styling of these kits
are not patented. The
body kits offered on this page are sold as an S Style Body Kit, not
1965, 1966,
1967, 1968 Shelby Body Kits out of respect for Shelby American, the mark holder.
Shelby, GT500, GT500E, GT-500 KR and GT350 are
all registered trademarks of Shelby American Inc. Mustang Depot has no
affiliation with either Shelby American or Ford Motor Company. The words Shelby and Mustang are
used for descriptive purposes only. |
|
1965-66 Mustang
Fiberglass E2
Body Kits
New Upper Nose! |
 
1965-66 Mustang S Style
Fiberglass Body Kit |
1967 Mustang S Style
Fiberglass Body Kit |
1968 Mustang S Style
Fiberglass
Body Kit |
|
|
1967-68
Mustang
Fiberglass E Body Kits
3rd Generation |
1964-70 Mustang Front
Aprons/Valances |
1964-68 Mustang
Ground Effects |
1964-68 Mustang
Fiberglass Fender Flares |
|
1964-73 Mustang
Fiberglass Hoods |
1964-70 Mustang
Fiberglass Side Scoops
|
1967-70 Mustang
Fiberglass Tail
Light Panels |
1964-70 Mustang
Spoiler Trunk Lids
|
|
Please Read: Since we move a lot of freight, you can take
advantage of our shipping discounts by pre-paying large truck freight items,
so call for a quote. There are small internet companies out there reducing
the price of similar merchandise and then raising the shipping price on the
tail side. If you tack-on the delivered price, they are not really an
inexpensive alternative. So make sure you find out the delivered price. On
"non" truck freight items, simply add the items to our shopping cart and
continuing to checkout to get the shipping charges. These internet sites are
working out of a small offices with minimal overhead and drop shipping
everything. The control over the movement of the product is lost and the
customer service relative to these shipments is limited. We remain
competitively priced, fully staffed by enthusiasts, and have an actual
warehouse, with inventory. Our friendly sales staff can assist you from the
sale of the product, through the install of the product.
We offer
the full line of fiberglass from both FSI and Maier
Racing. On Freight Collect
items, it is not permitted for the customer to
select a different shipping
option i.e. 3 day or 2nd day air via the web. If special shipping
arrangements are required, please call 702-262-0011 for assistance.
Fiberglass body parts do not fit the same as stamped steel parts. While
they can be finished to show quality, fiberglass body parts are built
closer to race car standards than show car standards. Although
fiberglass parts are easy to work with, they can require substantial work
to conform to the varying early unibody Mustangs. This means every car
is slightly different. We have come to this conclusion after many years
of installing and selling fiberglass body parts from many different
manufacturers. Within 30 days of receipt, you must check fit before
sanding or painting your new fiberglass pieces. If fiberglass parts have
been sanded or painted they can no longer be sold as new for either race
or show purposes. For this reason, the manufacturer will not warranty
such parts and cannot be accepted for a return. Our policy for returning
fiberglass parts is limited to the purchase price of the unit on
Exchange. A 20% restocking fee is applicable for the monetary return of
funds. In the event you feel the product is defective, our policy
requires that you send the product back to us fully insured, heavily
packaged to avoid damages and freight prepaid. A full investigation by
Mustang Depot and the manufacturer will ensue. This includes fitting the
item on the respective car, matching the part to the mold, and matching
it with other items produced from the same mold. If it is determined
that the product is not defective and is in reasonable constraints for
finishing, the product will be returned at the customers expense. If it
is deemed that the product is defective, a replacement will be sent at
no cost, and .the return freight charges incurred by the customer will
be refunded in the form of an in-store credit. All product that leaves
Mustang Depot is inspected and confirmed to be in good condition,
heavily packaged, and is insured for the value of the product. Noted on
the package are clear neon stickers warning you to inspect the product
in the presence of the carrier/driver. In the event damages occur, have
the driver notate the damage. If the package was left at your door, you
must notify the carrier immediately and file a damage claim. Do not
return the product to Mustang Depot it is our policy to refuse returns
without a Return Authorization number. Retain all the packaging so the
carrier can inspect the product. In most cases, small repairs can be
made at a reasonable cost. Get an estimate, and submit the claim. Full
loss claims are scrutinized much heavier. Please note: For fiberglass
hoods, removal of stock hood springs and use of a prop rod and hood pins
are highly recommended. for trunks, removal of springs or tension rods
is highly suggested. Fiberglass has about a 6-8 week cure time when it
comes out of the molds. So it's important to remove the parts from it's
packaging immediately. Do not place anything on top of the part during
storage. The part will attempt to take the shape of whatever it's stored
on top of as well. Especially in warmer climates. The best place to
store the part is on the car in it's intended position.
The word Mustang and the
word Shelby are used on our site for descriptive purposes only and are
not meant to imply any affiliation with either Ford Motor Company or
Shelby American.
Click here for our
Return
Policy |
|
If you don't see the Fiberglass Parts you are looking for,
please call 702-262-0011 for assistance!
|
| |
|
Back to 1965-73 Online
Catalog |
