Serpentine Conversion Kits Ford Small and Big Block
Photo Gallery of Ford Small Block Kits
Replace your trouble
prone V-Belt setup with a March Performance Serpentine
Conversion. These reliable serpentine conversion kits allow
you to upgrade to modern serpentine belts that prevent belt
slippage and throwing. Kits come in a variety of
configurations to suit any automotive project. "Click on part
numbers to get detailed information on the individual kits
and applications." If you do not see a part or accessory
listed, please call as we can take your order by phone
702-262-0011. Click here
for water pumps. Most 302's going to reverse rotation
water pumps use the 1986-93 water pumps. We are not responsible for incorrectly ordered
kits. Accessories are at the bottom of the order table.
March aluminum pulleys are precision CNC machined from
solid billet 6061-T6 aluminum to fit perfectly and handle
high torque and vibration. Bracket kits come complete with
stainless steel tensioning rods and chrome moly rod ends for
high performance operation. All necessary hardware included
when applicable. When offered, powdercoating will eliminate
polishing in those hard to reach places. Matching serpentine
pulleys are precision CNC machined from billet 6061-T6
aluminum. This is the same material used for NASCAR pulleys!
These pulleys will not fracture like common cast pulleys.
High tensile strength means much longer wear. We go as far
as hard coating the high wear areas on our high water flow
ratio pulleys! Our street rod ratio increase water flow and
fan speed. This helps at critical low speed driving.
Kit
Includes:
� Alternator bracket,
tensioner and hardware
� Crank pulley, water
pump pulley with nose
cover
� Alternator pulley with
fan and nose cover
� Power steering kit
includes bracket and
pulley
� A/C kits include A/C
bracket, idler pulley
and A/C cover
Must use
electric fuel pump with
kits that have power
steering.
Part
Description
Price
Qty
Purchase
1965-1969 289-302 351w C.I. 3
bolt dampener, passenger side lower radiator
hose water pump
March Serpentine Conversion 289,302 Ford This kits require a
90° angle thermostat housing. These kits also
require the use of a water pump and radiator
with a drivers side lower radiator hose. Must
use electric fuel pump with kits that have power
steering.
March Serpentine Conversion 289,302 Ford
High Flow Water
This kits require a 90° angle thermostat
housing. These kits also require the use of a
water pump and radiator with a drivers side
lower radiator hose. Must use electric fuel pump
with kits that have power steering.
Kit
Includes:
� Combination
Alternator/A/C bracket
with idler, tensioners
and hardware Non A/C
kits have alternator
only bracket without
idler
� Crank pulley, water
pump pulley with nose
cover
� Alternator pulley with
fan and nose cover
� Power steering kit
includes bracket kit for
Ford or Saginaw pump
unit and pulley
� Tensioning rod and rod
ends
� Grade 8 mounting
hardware
Kit
Includes:
� Alternator bracket and
tensioner
� Crank pulley, water pump
pulley, alternator pulley with
fan and alternator nose cover
� Reverse rotation alternator
only kit includes idler bracket
and idler pulley
� Power steering kit includes
bracket and pulley.
All of these kits
require a 90 degree angle
thermostat housing. These kits
also require the use of a water
pump and radiator with a drivers
side lower radiator hose. Must
use electric fuel pump with kits
that have power steering.
Some kits may
require crank pulley spacers:
289/302/351W using OE 3 bolt
balancer use #1432
289/302/351W engines using
Fluidamper (28 oz.) use #1431
289/302/351W using Ford SVO,
Summit balancers use #1433
1982-95 Mustang 5.0 engines
using stock or Fluidamper (50
oz.) do NOT require spacers
Meziere Backplate Style,
CSI and Aerospace Water Pumps Only. Will
not work with 94-95 Mustang, 89-93
T-Bird/Cougar and 96 Explorer and newer
timing covers.
Application:
Ford 351 Cleveland, 351M and 400.
Our larger diameter crank pulley aids in
driving your alternator, A/C, and water
pump at idle where it counts.
Kit Includes:
• 105 Amp Alternator, Chrome or Polished
(dependent on availability)
• 105 Amp Alternator, Chrome or Billet
(Kits 30450 30460)
• Alternator pulley with fan and nose
cover
• Matching Chrome or Polished A/C
compressor
• A/C Compressor nose cover
• Aluminum Water pump, and Hardcoated
pulley
• Alternator/A/C Bracket
• Crank pulley (Larger Dia for better
accessory drive)
• Idlers
• Belt Tensioning Tool
• All mounting hardware
Kits with
power steering include
• GM Type 2 power steering pump (does
not include hoses or reservoir)
• Canister Style Pump, Chrome or March
Billet (Kits 30450 30460)
• Power steering pulley with nose cover
• Idler
• Bracket with mounting hardware.
March Serpentine Conversion 351C, 351M and
400 with AC Ford Billet Alternator and Power
Steering - Black Powder Coated Pulleys and
Brackets
installation instructions
March Serpentine Conversion 351C, 351M and
400 Ford Chrome Alternator and Power Steering
-Black Powder Coated Pulleys and Brackets
installation instructions
March Serpentine Conversion 351C, 351M and
400 Ford Billet Alternator and Power Steering -
Black Powder Coated Pulleys and Brackets
installation instructions
$1880.00/kit
Ford Big Block 390, 427, 428 FE
Kit
Includes:
� Alternator bracket, tensioners and
hardware
� Crank pulley, water pump pulley with
nose cover
� Alternator pulley with fan and nose
cover
� Power steering kit includes brackets
and pulley with cover
� A/C kit includes bracket, tensioner,
idler pulley and nose cover
Add Accessories, pumps,
alternators at the bottom of the page.
Click on part numbers for more details
Kit
Includes:
� Alternator bracket, tensioners and
hardware
� Crank pulley, water pump pulley with
nose cover
� Alternator pulley with fan and nose
cover
� Power steering kit includes brackets
and pulley with cover
� A/C kit includes bracket, tensioner,
idler pulley and nose cover
