Procedure for installing glove box emblem to the
HumpHugger console!

Tools Needed:

  • Safety Glasses

  • Electric Drill

  • 3/16" Drill Bit or smaller size

  • Wood Punch

  • Small tube of glue ie. super glue or similar type

Directions

  • Center the emblem on the console where desired.

  • Using wood punch or small nail, carefully etch locations where prongs of emblem come in contact with console.

  • Using electric drill, slowly drill holes in console body.  Once holes are through console body, stop drill and dust off shavings.

  • Using super glue, carefully apply two small drops directly into each hole, then place emblem prongs into drilled holes and let dry overnight...

Return to Custom Consoles

 

 

Website and Contents Copyright © 1998-2008 Automotive Internet Retailers, LLC All rights reserved. Ford, Ford Mustang, Mustang GT, SVT Cobra, Mach 1 Mustang, Cobra R, Bullitt Mustang, SN95, S197, V6 Mustang, Fox Body Mustang, and 5.0 Mustang are registered trademarks of Ford Motor Company. Saleen is a registered trademark of Saleen Incorporated. Roush is a registered trademark of Roush Enterprises Inc. Shelby, GT500, GT500E, GT350 and Eleanor are registered trademarks of Shelby American Inc. Mustang Depot has no affiliation with Ford Motor Company, Roush Enterprises, Shelby American or Saleen. Throughout our website and catalogs, these terms are used for identification purposes only. All Ford logo products are licensed by Ford through the respective manufacturer. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders. Information and prices are subject to change without notice. Photos are for graphical representation only and may not be the exact product you are ordering. Sales taxes are applicable to Nevada residents. Thank you for choosing Mustang Depot
 Home   |   Terms and Conditions  |  Return Policy  |  Email List    |   Fax/Mail   |   Contact Us

Mustang Depot 2510 E. Sunset Rd #7 Las Vegas, NV 89120