Satin Stretch™ is an indoor Custom Car Cover fabric. It will fade if
exposed to extended sun, and is not water resistant. Satin Stretch™ is
the SOFTEST fabric available, and has Lycra yarns to hug every contour
of a vehicle. Blind stitching results in invisible seams - this is a
SEXY car cover!
culmination of over a decade of material engineering, it has only
recently been possible to manufacture the microscopic yarns which go
into this advanced micro-fiber Custom Car Cover material. Only one
textile mill in the world was able to meet these specifications - and
although challenged by the design, the results are truly a triumph for
car cover users! Stormproof is UNCOATED and
UNTREATED this means that even after months or years of use, it
will have the same properties! Stormproof feels more like an expensive
golf jacket, yet is tested to be the MOST WATER RESISTANT and (because
there are no coatings) the MOST BREATHABLE. You can't go wrong with
Stormproof - available in gray, black, red, wine, and two tone
combinations with black sides.
PLEASE NOTE: WHEN
PUTTING ON YOUR CAR COVER, IT'S IMPERATIVE THAT IT BE AS CLEAN AS
POSSIBLE. DUST, DIRT AND GRIM WILL SIMPLY BE GROUND INTO THE VEHICLES
FINISH IF NOT REMOVED PRIOR TO INSTALLATION.
Protect your car
from hazards while providing a clean, custom fit.
No expense is spared in creating a custom car cover which fits
perfectly, and with the fewest seams possible.
Why Choose our Custom Car Covers?
Superior Custom Car Covers in fit, material properties, looks, strength
and features. Our Custom Car Covers protect the vehicle interior from
fading, block prying eyes from seeing what’s inside the car (and acting
as a theft deterrent) and help the environment by reducing the need for
car washing. Some our materials can prevent minor nicks, scratches and
even small hail damage. Our Custom Car Covers are a great way to protect
vehicles parked at airports or near industrial sites. In very sunny
climates, they keep the interior cooler and in winter they keep the snow
off the glass. Using fewest seams, our Custom Car Covers look great!
Pattern Fit and Design
Car Covers use a lot of material, - 30 yards is common for most
vehicles. In an effort to save material, some car cover manufactures use
patterns which are “chopped up” into small pieces, and sewn together
creating a patchwork effect. This method saves more than 20% of total
material use, but results in car covers which look like patchwork quilts
– seams everywhere. By having extra seams, risks of seam failures and
seam leakage increase. In addition, the car cover looses it’s custom
look and resembles a universal cover. our has never compromised the
function or fit of it’s Custom Car Covers to save a few yards of fabric.
The qualities that make a Car Cover suitable for use depend largely on
the fabric properties. All our outdoor Custom Car Cover materials are
breathable – this allows moisture which is trapped under the car to
escape through the cover, preventing a “greenhouse” condition of
condensation which may result in rust damage. Unlike other car covers,
our Custom Car Covers are designed to withstand the color fading effects
of the sun. .
Our Custom Car Covers are designed and cut on sophisticated CAD/CAM
systems, which our pioneered twenty years ago. All outdoor Custom Car
Covers are sewn using double needle and overlapped seams, resulting in a
durable, leak resistant seam which has a backup stitch if the main
stitch fails. Ours indoor Stretch Satin fabric is sewn with a "blind
seam" which is ideal for use in the indoor, show-car conditions the
fabric was designed for. Our Custom Car Covers have neoprene elastic
tensioners sewn in the front and rear of every cover. Protection
grommets for the optional security kit are sewn in the sides and
covered, so as not to be visible when the car cover is covering a
vehicle. All outdoor Custom Car Covers are sewn with heavy, wax coated
thread. The thin coating of wax helps to seal the fabric where the
needle pierced through, reducing the chance of leakage through the seam.
Licensed Ford Logos
Should you choose the logo option, the logos will arrive
the approx. size of the logos on the car and are intending to replicate
the way the logo appears on the car. Should you wish them larger, please
contact us for the size you want and we will charge an incremental fee
based on your request.