NOT AFFILIATED WITH FORD MOTOR COMPANY®

 
Follow Us



  1. Fully Integrated Hood Scoops

  2. Functional Ram Air Design which diverts cool air from outside into engine bay

  3. Steel riveted latch plate designed to provide maximum safety in the most extreme conditions

  4. Cool air exit chamber which delivers it right over air box.

  5. Click here for Foose 69 Style Metal Hoods

  6. Free Shipping to addresses within the Continental USA

Notice on "All" Mustang® Hoods  Hood will need to be fitted, sanded, primed, and painted. Average painted and installed price is approximately $250-$500. Hoods will have functional "Ram Air" when noted. Please allow 7-10 days delivery. It's recommended to use hood pins when running a fiberglass hoods but it's not required. The only pictures we have available are the ones represented below.

Please Note: Due to the delicate nature of shipping fiberglass it's important to note the following damage policy. In all cases, Mustang Depot pre-inspects all products for damages prior to shipping. If you receive a package that has been damaged, please notify the driver prior to him leaving. This will speed up the damage claim process and in some cases, they will not even accept the claim without the damage notation from the driver. It's best to open the package in front of the driver. We insure the products full value and it is the responsibility of the carrier to reimburse losses. Damage claim losses are not Mustang Depot's responsibility. Please keep the product and packaging in the original condition in which you receive it, for investigation by the freight company responsible. The claim cannot be paid if the packaging is not present! Please call with the claim number to get the process started for reimbursement 702-262-0011!

2010,2011,2012,2013,2014 2011, 2012, 2013, 2014 Mustang® Hood Accessories

Part # Description Price Qty Purchase


5R3Z-6316892-K

2005-2014 Mustang® Billet Hood Pin Kit
This stainless steel and billet aluminum kit comes complete with special mounting brackets 05-09. Mounting instructions included for 05-09 but can be adapted to fit early model Mustangs® as well as the 2010-2012 as well. Does not fit GT500®. Please note: Some hoods require alternative placement due to the design.
$99.99/kit


DAA-HD13FD

2005-2014 Mustang® ALL Ford Racing Hood Strut Kit - These Ford Racing branded hood lifts utilize two gas struts that lift and hold your hood without the need for a prop-rod. Simply start to lift your hood and let the LIFT system take over. Your hood will lift and hold firmly at the raised position - no wind or bumping will knock your hood down on your head. These gas struts are rated at 90 LBS to hold up specialty hoods found on the Super Snake, GT500KR, GT350 and most hoods as well as any OEM hood. The specialty hoods are all front heavy hoods. Due to the leverage when open, a 90 LBS rated strut will keep the hood open securely. The last thing you want to see is your hood slam down with a gust of wind at a car show while an observer is looking under the hood! Commonly found on the market are the 70 LBS rated gas struts which aren't sufficient to hold up these specialty hoods.
$139.99/set


ENG-058-HLK1

2005-2010 Mustang® Color Matched Powder Coated Hood Strut Kit - Does not fit Shelby® GT500®, GTH, 2011-Up models


$124.99/set


ENG-010-HLK2

2011+ Mustang GT/V6 & 2007-2013 GT500® Color Matched Powder Coated Hood Strut Kit


$134.99/set


AR3Z-16796/7-BL

2010-2012 Mustang® GT Billet Hood Strut Kit (also fits 2005-2009) Does not fit Shelby® GT 500, GTH, or 2010-up V6 models

Eliminate your factory prop rod by replacing it with our beautiful bolt in gas strut hood lift kit. The assembly was engineer to lightly lift the hood for you and hold it open allowing easy access all around your engine bay. Truss design brackets are CNC machined from 6061-T6 billet aluminum and clear anodized. Includes high quality satin finished struts with stainless steel hardware. Drilling is required.
$134.99/set


AR3Z-16826-S

2010-2012 Mustang® Stainless Hood Prop Rod w/Protective Coating
$29.99/set


CDC-112050

2005-2014 Mustang® Squirter Nozzle Relocation kit
$59.99/kit


CF-100002

Universal Carbon Fiber Hood Vents - Narrow
$349.99/pr


CF-100004

Universal Carbon Fiber Hood Vents - Wide

$349.99/pr


TC10025-LG183

2010-2012 Mustang Carbon Fiber Hood Vents Mustang® Direct Fit Carbon Fiber  by Trufiber
Fits: 2010-2012 Mustang with TC10025-A53 & TC10025-A53KR Hood
$199.99/pr


TC10025-LG142

2013-2014 Mustang® Direct Fit Carbon Fiber Hood Grill Insert Set by Trufiber
Fits: 2013+ Mustang GT/V6
$279.99/pr



TC10025-LG77KR

2010-2014 Shelby® Mustang® Carbon Fiber Hood Grill Insert No affiliation with Shelby® or Ford
Fits: Shelby® GT500®

$399.00/ea


TF10024-LG82

2005-2012 Mustang® Fiberglass Rain Guard Set
Fits
hoods: TF10024-A61, TC10024-A61, TF10025-A61 & TC10025-A61
$89.00/pr
2010-2014 Mustang® / Shelby® Hoods - All carbon fiber hoods and components are real carbon fiber, not a hydro carbon finish.
2013+ Mustang® GT,V6 and 2010-2014 Shelby® GT500®
Part # Description Price Qty Purchase

   
TF10025-A72KR

2013-2014 Mustang® V6 & GT & 2010-2014 Shelby® GT500® Fiberglass A72KR Hood SAVE $100

  • Built-in Ram Air Kit (removable)
  • Fully Functional Ram Air
  • Cool Air Enters Open Front Air Scoop & Directs Over To OEM Air Box Location
  • Fully Functional Heat Extractor
  • Removable Heat Extractor Vents
  • Hot Air Exits From Two Open Heat Extractor Vents
  • Quality Finish
  • Hand Laid Fiberglass
  • Smooth Gel Coat Finished Both on Top and Bottom Sides
  • Reinforced Metal Latch & Hinge Plate For Additional Safety
  • Integrated Stainless Mesh Grille
  • Pre-Drilled Prop Hole
  • Direct Bolt-on Using OEM Hardware
  • Approximate Weight: 40 Pounds
$899.99/ea

 
TC10025-A72KR

2013-2014 Mustang® V6 & GT & 2010-2014 Shelby® GT500® Carbon Fiber A72KR Hood

  • Infused Real Carbon Fiber
  • Quality Finished
  • Carbon Fiber Both On Top & Bottom Sides
  • Built-in Ram Air Kit
  • Fully Functional Ram Air (removable)
  • Cool Air Enters Open Front Air Scoop & Directs Over To OEM Air Box Location
  • Fully Functional Heat Extractor
  • Removable Heat Extractor Vents
  • Hot Air Exits From Two Open Heat Extractor Vents
  • Reinforced Metal Latch & Hinge Plate For Additional Safety
  • Integrated Stainless Mesh Grille & Billet Grille
  • Pre-Drilled Prop Hole
  • Direct Bolt-on Using OEM Hardware
  • Approximate Weight: 30 Pounds
  • Paintable

$1889.99/ea


TF10025-A53KR

2013-2014 Mustang® V6 & GT & 2010-2014 Shelby® GT500® Fiberglass Venom Hood SAVE $250
Fully Functional Heat Extractor, Hot Air Exits From Two Open Rear Heat Extractor Vents, Quality Finished, Fiberglass smooth finish both on top and bottom, Reinforced Metal Latch & Hinge Plate For Additional Safety, Integrated Stainless Mesh Grille, pre-Drilled Prop Hole, Direct Bolt-on Using OEM Hardware, Approximate Weight: 40 Pounds
$749.99/ea


TC10025-A53KR

2013-2014 Mustang® V6 & GT & 2010-2014 Shelby® GT500® Carbon Fiber Venom Hood
Fully Functional Heat Extractor, Hot Air Exits From Two Open Rear Heat Extractor Vents, Quality Finished, Carbon Fiber Both on Top and Bottom Sides, Reinforced Metal Latch & Hinge Plate For Additional Safety, Integrated Stainless Mesh Grille, pre-Drilled Prop Hole, Direct Bolt-on Using OEM Hardware, Approximate Weight: 40 Pounds
$1889.99/ea

   
TF10025-A49-3KR

2013-2014 Mustang® V6 & GT & 2010-2014 Shelby® GT500® Fiberglass 3" Cowl Hood
Fully Functional Heat Extractor, Hot Air Exits From Two Open Rear Heat Extractor Vents, Quality Finished, Fiberglass smooth finish both on top and bottom, Reinforced Metal Latch & Hinge Plate For Additional Safety, Integrated Stainless Mesh Grille, pre-Drilled Prop Hole, Direct Bolt-on Using OEM Hardware, Approximate Weight: 40 Pounds
$689.99/ea

 
TC10025-A49-3KR

2013-2014 Mustang® V6 & GT & 2010-2014 Shelby® GT500® Carbon Fiber 3" Cowl Hood
Fully Functional Heat Extractor, Hot Air Exits From Two Open Rear Heat Extractor Vents, Quality Finished, Carbon Fiber Both on Top and Bottom Sides, Reinforced Metal Latch & Hinge Plate For Additional Safety, Integrated Stainless Mesh Grille, pre-Drilled Prop Hole, Direct Bolt-on Using OEM Hardware, Approximate Weight: 40 Pounds
$1589.99/ea
2010-2012 Mustang® GT & V6
Part # Dscription Price Qty Purchase


TF-10025-A53

2010-2012 Mustang® Fiberglass Venom Hood w/Billet Insert Grills SAVE $120 Limited to Quantity On-Hand
Hood Comes Unpainted


Built-in Ram Air Kit, Fully Functional Ram Air, Cool Air Enters Open Front Air Scoop & Directs Over To OEM Air Box Location, Fully Functional Heat Extractor, Stainless Aluminum Grille (Removable), Hot Air Exits From Two Open Heat Extractor Vents
, Quality Finished, Hand Laid Fiberglass, Smooth Gel Coat Finished Both on Top and Bottom Sides, Reinforced Metal Latch & Hinge Plate For Additional Safety, Integrated Stainless Mesh Grille,Pre-Drilled Prop Hole,Direct Bolt-on Using OEM Hardware,Approximate Weight: 40 Pounds
$679.99/ea


TC-10025-A53

2010-2012 Mustang® Carbon Fiber Venom Hood w/Billet Insert Grills Hood Comes Unpainted, Real Carbon Fiber Finish- Carbon Fiber Top and Bottom SAVE $150 Limited to Quantity On-Hand
$1448.99/ea


TF10025-A42

2010-2012 Mustang® Fiberglass SH-GT Hood Hood Comes Unpainted
Fully Functional Ram Air, Quality Finished, Hand Laid Fiberglass, Smooth Gel Coat Finished Both on Top and Bottom Sides, Reinforced Metal Latch & Hinge Plate For Additional Safety, pre-Drilled Prop and squirter holes, 2 inches longer in the front than stock hood, Direct Bolt-on Using OEM Hardware, Approximate Weight: 40 Pounds
$599.99/ea


TC10025-A42

2010-2012 Mustang® Carbon Fiber SH-GT Hood Hood Comes Unpainted
Infused Real Carbon Fiber, Show Quality Finished, Smooth Black Gel Coat On Bottom Side, Built-in Ram Air Kit, Fully Functional Ram Air, Cool Air Enters Open Front Air Scoop & Directs Over To OEM Air Box Location, Reinforced Metal Latch & Hinge Plate For Additional Safety, Integrated Stainless Mesh Grille & Billet Grille,Pre-Drilled Prop Hole, Direct Bolt-on Using OEM Hardware, Two Inches Longer Than Stock (Extended Nose), Approximate Weight: 30 Pounds, Paintable
$1598.99/ea


TF10025-A49-3

2010-2012 Mustang® Fiberglass 3" Cowl Hood Hood Comes Unpainted
Fully Functional Heat Extractor, Hot Air Exits From Two Open Rear Heat Extractor Vents, Quality Finished, Hand Laid Fiberglass, Smooth Gel Coat Finished Both on Top and Bottom Sides, Reinforced Metal Latch & Hinge Plate For Additional Safety, pre-Drilled Prop Hole, Direct Bolt-on Using OEM Hardware, WILL NOT WORK WITH HOOD SHOCKS, Approximate Weight: 40 Pounds
$579.99/ea


TC10025-A49-3

2010-2012 Mustang® Carbon Fiber 3" Cowl Hood Hood Comes Unpainted
Fully Functional Heat Extractor, Hot Air Exits From Two Open Rear Heat Extractor Vents, Quality Finished, Hand Laid Fiberglass, Smooth Gel Coat Finished Both on Top and Bottom Sides, Reinforced Metal Latch & Hinge Plate For Additional Safety, pre-Drilled Prop Hole, Direct Bolt-on Using OEM Hardware, WILL NOT WORK WITH HOOD SHOCKS, Approximate Weight: 40 Pounds
$1389.99/ea



TF10025-A61

2010-2012 Mustang® Fiberglass RTF Ram Air Hood Hood Comes Unpainted
  • Built-in Ram Air Kit
  • Fully Functional Ram Air
  • Cool Air Enters Open Front Air Scoop & Directs Over To OEM Air Box Location
  • Fully Functional Heat Extractor
  • Stainless Aluminum Heat Extractor Vents (Removable)
  • Hot Air Exits From Two Open Heat Extractor Vents
  • Quality Finished
  • Hand Laid Fiberglass
  • Smooth Gel Coat Finished Both on Top and Bottom Sides
  • Reinforced Metal Latch & Hinge Plate For Additional Safety
  • Integrated Stainless Mesh Grille
  • Pre-Drilled Prop Hole
  • Direct Bolt-on Using OEM Hardware
  • Approximate Weight: 40 Pounds
$699.99/ea



TC10025-A61

2010-2012 Mustang® Carbon Fiber RTF Ram Air Hood Hood Comes Unpainted
  • Infused Real Carbon Fiber
  • Quality Finished
  • Smooth Black Gel Coat On Bottom Side
  • Built-in Ram Air Kit
  • Fully Functional Ram Air
  • Cool Air Enters Open Front Air Scoop & Directs Over To OEM Air Box Location
  • Fully Functional Heat Extractor
  • Stainless Aluminum Heat Extractor Vents (Removable)
  • Hot Air Exits From Two Open Heat Extractor Vents
  • Reinforced Metal Latch & Hinge Plate For Additional Safety
  • Integrated Stainless Mesh Grille & Billet Grille
  • Pre-Drilled Prop Hole
  • Direct Bolt-on Using OEM Hardware
  • Approximate Weight: 30 Pounds
  • Paintable
$1589.99/ea

Back to Exterior

Please Note:  Fiberglass body parts do not fit the same as stamped steel parts.  While they can be finished to show quality, fiberglass body parts are built closer to race car standards than show car standards.  We have come to this conclusion after many years of installing and selling fiberglass body parts from many different manufacturers.  Check fit before sanding or painting your new fiberglass pieces.  If fiberglass parts have been sanded or painted they can no longer be sold as new for either race or show purposes.  For this reason, the manufacturer will not warranty such parts.  Our policy for returning fiberglass parts is limited to the purchase price of the unit.  All freight charges incurred are the responsibility of the purchaser/customer.  For fiberglass hoods, removal of stock hood springs and use of a prop rod and hood pins are highly recommended. Mustang Depot is not affiliated with Ford Motor Company. All products herein are reproductions and not affiliated directly with either Ford or Shelby® American unless noted. All Ford products are licensed by Ford through the respective manufacturer. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.

 mustang hood, hoods, 2010 mustang hood, 2011 mustang hood,2012 mustang hood,2013 mustang hood,custom,shelby,carbon fiber,trufiber,gts

 

Hot Mustang Mods

Universal


Snow Performance Boost Cooler Kits


Auto Meter Gauges

Mustang Mods

Hoods
2005-2014 Mustang®

Center Stripes

2005-2014 Mustang®

Cup Holder Trim
Boss & Shelby
2010-2014 Mustang


Billet Grills
2005-2014 Mustang®

Power Packages
2010-2014 Mustang®

Street Scene Body Kit
2005-2014 Mustang


9 Inch Conversions
2010-2014 Mustang®


Intake / Tuner Combo Kits
2010-2014 Mustang®
Click for SUPERCHARGERS: Vortech V-1 Series Supercharger
Vortech Superchargers

2010-2014 Mustang®

Printed Car Covers
2010-2014 Mustang

Check Engine Light Eliminator

2010-2014 Mustang

Logo Trunk Mats
2010-2014 Mustang

JBA & BBK X Pipes
2010-2014 Mustang®

Website and Contents Copyright © 1998-2015 Automotive Internet Retailers, LLC DBA Mustang Depot, a division of Depot Automotive Group® All rights reserved. Ford®, Ford Mustang®, Mustang GT®, SVT Cobra®, Mach 1 Mustang®, Boss Mustang®, Cobra R®, Bullitt Mustang®, SN95®, S197®, V6 Mustang®, Fox Body Mustang®, GT350®, GT350R® and 5.0 Mustang® are registered trademarks of Ford Motor Company®. All Ford® logo products herein are strictly licensed by Ford® to the respective supplier. Saleen® is a registered trademark of Saleen® Incorporated. Roush® is a registered trademark of Roush® Enterprises Inc. Shelby®, GT500®, GT500E® and Eleanor® are registered trademarks of Carroll Hall Shelby Trust. All Shelby® logo products are licensed to the respective manufacturer or supplier by Carroll Shelby Licensing Inc, acting on behalf of Carroll Hall Shelby Trust. Mustang Depot has no affiliation with Ford Motor Company®, Roush® Enterprises, Shelby® American or Saleen®. Throughout our website and catalogs, these terms are used for identification purposes only. All products herein are reproduction parts unless specifically noted as "original" Ford® parts. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders. Information and prices are subject to change without notice. Photos are for graphical representation only and may not be the exact product you are ordering. Sales taxes are applicable to Nevada residents and in some cases where we drop ship from a warehouse within the same state as the customer. Thank you for choosing Mustang Depot!

 

Home   |   Terms and Conditions  |  Return Policy  |  Site Map   |   Email List   |   Fax/Mail   |   Links   |   Line Card   |   Contact Us 

 

Mustang Depot 2510 E. Sunset Rd #3 Las Vegas, NV 89120