Splash
Application Wetting Solution Concentrate -
Makes 1 Gallon
$17.50/ea
GE-K398-S10
2010-2011
Mustang
Hood Bulge Stripes For use with Ford Factory Hood Bump Shown to
left ONLY
Includes: Dual stripes for factory hood
bump Hood Scoop
Designation -Click Here
$78.95/kit
GE-K392-S10
2010-2011
Mustang Hood Bulge Stripes
with Fader Decals For use with Ford Factory Hood Bump Shown to
left ONLY
Includes: Dual stripes for factory hood
bump Hood Scoop
Designation -Click Here
$118.95/kit
GE-K368-S10
2010-2011
Mustang Dual
Hood Stripes For use with Ford Factory Hood Bump Shown to
left ONLY
Includes: Dual stripes for factory hood
bump Hood Scoop
Designation -Click Here
$64.95/kit
GE-K440-S10
2010-2011 Mustang Dual
Hood Stripes For use with S10 style hood shown -
Only
Includes: Dual Scoop Stripes, Dual Hood
Stripes
and Front Dual Bumper Stripes
$89.95/kit
GE-K441-S10
2010-2011 Mustang Dual
Hood Stripes For use with S10 style hood shown -
Only
Includes: Dual Scoop Stripes, Dual Hood
Stripes
NO Bumper Stripes
$79.95/kit
GE-K377
2010-2011 Mustang Dual
Hood Scoop Side Accents For use with both styles of hoods
Includes: Cowl Stripes for both sides of
hood. Shown also with optional full length hoods stripes below.
$42.95/kit
GE-K363-S11
2010-2011 Mustang Dual
Hood Stripes For use with Ford Factory Hood Scoop Shown to
left ONLY
Includes: Dual Scoop Stripes, Dual Hood
Stripes NO Bumper Stripes Hood Scoop
Designation -Click Here
$119.95/kit
GE-K360-S11
2010-2011 Mustang Dual
Hood Stripes and Bumper Stripes For use with Ford Factory Hood with
Scoop Shown to
left ONLY
Includes: Dual Scoop Stripes, Dual Hood
Stripes and Front Dual Bumper Stripes Hood Scoop
Designation -Click Here
$139.95/kit
GE-K383
2010-2011 Mustang Trunk Lid Stripe Kit For use with Pedestal wing or No wing
$44.95/kit
GE-K387-W11
2010-2011 Mustang Trunk Lid Stripe Kit For use with Pedestal wing ONLY shown
to the left
$44.95/kit
Fader
Style - No Name with Hood Stripes -
4 piece kit has dual center
stripes and fade decal that come
down on fenders. Hood stripe width 12.5" at windshield. If you have a
hood scoop the scoop will have to be removed
for installation of Hood Stripes an then reinstalled. Hood stripe width 12.5" at windshield.
Click here for hood scoop options Kit price shown increases by $20
for any color selected other than Black or White. Selecting Red Adds
$50.
Part #
Description
Price
Qty
Purchase
GE-K100-S6
2005-2009 Mustang Boss Fader Decal Kit
$109.95/kit
2005-2009 Mustang Hood
Decal Kits Some color options will
increase the price as noted in the drop down.
2005-2009 Mustang Optional Front Valance Kit
12" Wide straight dual stripes are 24"
long. 2 STRIPES INCLUDED. Installer will have to cut stripes after
installed on car to have proper width.
Colors other than White & Black are an additional $5 automatically
added. The Red option will raise the price by $20
Installer please
note: These
stripes are wider than needed and will have to be seamed under the top
bumper lip. After stripes are applied the installer will have to cut
the width to size on the car using a razor blade. VERY DANGEROUS!! We
do not recommend cutting on the vehicle, do this at your own risk.
Caution, serious damage can
be done to paint finish when
trimming on car. This product is custom and non-returnable and
non-refundable.
You will need to make a wetting solution by adding
1 tablespoonful of "DAWN ORIGINAL" dish soap in one gallon
of water. No substitutions and no guessing.
Put
wetting solution in a very clean spray bottle.
Note: when using any wetting solution allow
extra adhesion time for the decal to bond to car.
This is normal, and up to 1 hour will be needed.
Our opinion is: the commercial brand
ActionTac application
solution works best.
We use it in our shop all the time.
2010-2011
